If you want to use the 1-way dampers on your purpose built race car, custom valving is available to optimize track performance at the expense of street ride. The standard valving on the 1WNR damper is designed to provide a good ride for the street car that sees occasional track time. However custom spring rates are available on request. I have found that a spring rate ratio of about F/R=.75 to be ideal for the MR2, and the standard spring rate options reflect that. The exception to that is the 4 way dampers which have less adjustment range, allowing for more fine tuning around a chosen spring rate. The standard valving on these dampers will handle spring rates of approximately 200 lb/in to 800lb/in front, and 400lb/in to 1000lb/in rear using the built in adjustment. However, they significantly complicate the installation as the hoses must be securely routed and the canisters mounted to the body of the car, and additional (large) holes may need to be drilled to pass the canisters through, depending on where you choose to mount them. Remote reservoirs provide an improvement in damper performance and adjustability, particularly in the ability to handle bumps and curbing on a track.
The mild top mount option allows the adjuster to be accessed with no modification to the chassis, at the expense of tire clearance and camber curve. The extreme top mounts of course require a new hole be drilled for adjuster access, as described in my blog. NOTE: Due to the design of the adjuster, the rear inner strut mount point on the chassis must be enlargedin order to access the adjuster on the front strut when using with Wilhelm Raceworks standard top mounts. Made in the USA! Built to order, please allow 4-10 weeks (depending on current strut body inventory). Adjustable front sway bar end links and roller bearing front spring perches are also included. Please let me know if you have a strong preference one way or the other. Due to availability issues, springs may be either Hyperco or Eibach. The MCS damper as supplied by MCS includes lower spring perches in your choice of 2.25", 60mm, or 2.5" diameter.Īll Wilhelm Raceworks coilover builds using MCS struts use 2.25" springs for maximum tire clearance, and lowest weight. See the Motion Control buyers guide for more specific technical details.Īvailable as either the bare strut from Motion Control (add your own springs, upper perches, and top mounts), or a complete coilover assembled by Wilhelm Raceworks with your choice of standard or extreme Wilhelm Raceworks top mounts. Remote reservoirs are available on the 2-way adjustable, and standard on the 3 and 4 way. MCS dampers feature a monotube design, and are available in multiple configurations ranging from single adjustable (rebound only) up to 4-way adjustable (independent adjustment of low and high speed compression, and low and high speed rebound), with 2-way and 3-way options in between. Jointly developed for the MR2 by MCS and Wilhelm Raceworks, and available exclusively through Wilhelm Raceworks, the MCS damper system is one of the best currently on the market! These coils came factory on most 2005 + GM based vehicles with the LS based engines.Premium, motorsports grade damper systems from Motion Control Suspension, for the SW20 MR2. This kit will only work with the LS2, LS7 LSX MSD 30502 with coil part number 12573190, or D514A, See my other listing if you need relocation harnesses as well. These brackets can be mounted on the frame rails, firewall, under the headers on each side, etc. The hardware consists of four 1/4" through bolts and poly lock nuts, and 12 billet aluminum spacers. This kit contains two brackets and enough hardware to do 8 coils or one V8 engine. Consisting of two laser cut cage type brackets that have been powder coated gloss black. This is a bolt on LS coil relocation kit.
With coils mounted they are approximately 6"x4.25"x2.25" Laser Cut and Powder Coated Black Bracket - 2 Brackets Includedīrackets are 6"x3.5"x1.25". 475 thickness where they bolt to the bracket
These coils are typically Round and have a. Fits LS2 LS7 LSX with Coils Part number 12573190, D514A, MSD 30502 LS Multi Coil Bracket Mounting Kit For Motion Billet Valve Covers by Motion Raceworks Motion Raceworks 10-12007 - LS Multi Coil Bracket Mounting Kit For Motion Billet Valve Covers Fits LS1 Car, LS3, L92, and LQ4 Coil Packs.
0 kommentar(er)
